September 2018
Fuel Bib
To prevent fuel stains down the side of my motorhome, I made a bib from Dicor rubber roof material (other material also could be used). I cut the material to the required size and then snipped a round hole in it, slightly smaller than the filler neck to ensure a good seal. Against a strip of scrap aluminum, I screwed the bib in place. The bib folds up around the cap so the fuel door can close.
Bruce Chong, F31175
Lake Havasu City, Arizona
Send us your Tech Tips!
Do you have ideas for saving time, money, or effort? If your tip is chosen for publication, you will receive $35. Send to “Tech Tips,” Family RVing magazine, 8291 Clough Pike, Cincinnati, OH 45244; techtips@fmca.com. Please include photos or sketches.